Table of Contents
Advertisement
7-2
PCB Transfer
The transferring state of board between each conveyor is checked and the board can be moved to
the optional position.
The machine checks the board on the conveyor at first. If it is, the board appears in green at that
conveyor on the screen. Pressing the button for the position to transfer starts transferring the
board. The board at the transfer end position blinks during transferring. After transferring, the board
at the transfer start position goes out, and is displayed at the transfer end position.
UNLOCK
and
The demand signal is commanded to the pre-station and the board is transferred to the left
conveyor.
UNLOCK
and
The board is transferred from the front conveyor to the board holder (middle conveyor).
UNLOCK
and
The board is transferred from the front conveyor or board holder (middle conveyor) to the right
conveyor.
UNLOCK
and Carry out
The board is transferred to the post-station.
293C-E-EMA07-A01-01
Carry in
Load
Unload
E.g.) When the board is on the board
holder, press
• The board is transferred from the board holder
to the rear conveyor.
UNLOCK
and Unload .
Page 7-3
7
Advertisement
Table of Contents
