Table of Contents
Advertisement
1-4
Other Specifications
1-4-1
Applicable Board Specifications
Items
Board size
Range of board warp
tolerance
Board recognition
mark
Page 1-10
50 ≤ L ≤ 330
50 ≤ W ≤ 250
0.4 ≤ H ≤ 3.0
Max.: 330 (L) × 250 (W)
Min. : 50 (L) × 50 (W)
Under ± 1.2 mm
Warp
293C-046E
Example of mark shape
The board recognition is corrected by the positional relation between the recognition
mark and the circuit pattern.
The fixed contrast is required for the recognition mark and board. (binary contrast
image)
1
293C-047E
Mark size and back ground
The noninterference area larger than the fixed size which is different from that mark is
required for the background of mark.
3F3C-IL012
Specifications
Transfer direction
L (length) mm
Board cross section
2
3
4
Mark
W (width) mm
H (board thickness)
mm
Warp
5
Noninterference area
a ≥ more than 2 mm
The mark is not neces-
sarily black.
293C-E-EMA01-A01-01
Advertisement
Table of Contents
