1-1
Characteristics of Machine
1-1-1
High-speed and High Accuracy Dispensing
Dividing the X-Y movement makes the movable part lighter and achieves the super high speed
dispensing of 0,08 seconds per point.
At the same time of these, dispensing accuracy is greatly improved to ± 0.1 mm.
General machine (BD12S-MR)
Head
Recognition
camera
Board
1-1-2
High Quality Dispensing
Dispensing recognition feedback function
The change of dispensing quantity by the remained bond in the syringe is detected (binary image)
by using the preparatory tape unit, and dispensing time is automatically controlled. This always
carries out stable dispensing.
Recognition camera
Recognition screen
(Dispensing area and shape)
Page 1-2
Y
X
• Making the movable
part lighter
Head : X-Y movement
Board : Fixed
Bond preparatory dispenser
Preparatory dispensing tape unit
BD30S-M
Y
Example of threshold value setting
Setting value within ± 15 %
Setting value from ± 15 to 50 %
Setting value more than ± 50 %
X
Head : X movement
Board : Y movement
: OK
: Feedback
: NG
293C-E-EMA01-A01-01