Keyboard Operations When Using The Console; Basic Operations For Console Input; Command Help - Yamaha L2 Command Reference Manual

20 | Command Reference | How to use the commands

2.5 Keyboard operations when using the console

2.5.1 Basic operations for console input

The SWR2311P allows the following operations in the command line.
• Moving the cursor
• Deleting an input character
• Other

2.5.2 Command help

By entering '?' in the command line you can search for the available commands or parameters.
SWR2311P#show vlan ?
<1-4094>
access-map
brief
filter
private-vlan
Keyboard operation
→
←
Press Esc, then F
Press Esc, then B
Ctrl + A
Ctrl + E
Keyboard operation
Backspace
Ctrl + H
Ctrl + D
Press Esc, then D
Ctrl + K
Ctrl + U
Keyboard operation
Ctrl + T
Ctrl + C
Ctrl + Z
VLAN id
Show VLAN Access Map
VLAN information for all bridges (static and dynamic)
Show VLAN Access Map Filter
private-vlan information
Description and notes
Move right one character
Move left one character
Move right one word (move to the character following the
end of the word at the cursor location)
Move left one word (move to the first character of the word
at the cursor location)
Move to the beginning of the line
Move to the end of the line
Description and notes
Delete the character at the left of the cursor
Delete the character at the cursor.
If this operation is performed when the command line is
empty, the result is the same as the exit command.
Delete from the cursor position until immediately before the
first space
Delete from the cursor position until the end of the line
Delete all characters that are being entered
Description and notes
Exchange the character at the cursor position with the
preceding character.
If the cursor is at the end of the line, exchange the preceding
character with the character that precedes it.
In unprivileged EXEC mode and priviledged EXEC mode,
discard the command being entered and move to the next
line.
In individual configuration mode, discard the command line
being entered and move to priviledged EXEC mode.
Command processing that is currently being executed will
be stopped. (ex: ping command)
Move from individual configuration mode to priviledged
EXEC mode.
This is the same operation as the end command.