Check Ipv6 Route; Set Dns Lookup Function - Yamaha L2 Command Reference Manual

[Description]
Send ICMPv6 Echo to the specified host, and wait for ICMPv6 Echo Reply.
When it is received, indicate this. Show simple statistical information when the command ends.
[Note]
[Example]
Ping fe80::2a0:deff:fe11:2233.
SWR2311P#ping6 fe80::2a0:deff:fe11:2233%vlan1
PING fe80::2a0:deff:fe11:2233%vlan1 (fe80::2a0:deff:fe11:2233%vlan1): 56 data bytes
64 bytes from fe80::2a0:deff:fe11:2233: seq=0 ttl=64 time=2.681 ms
64 bytes from fe80::2a0:deff:fe11:2233: seq=1 ttl=64 time=4.760 ms
64 bytes from fe80::2a0:deff:fe11:2233: seq=2 ttl=64 time=10.045 ms
64 bytes from fe80::2a0:deff:fe11:2233: seq=3 ttl=64 time=10.078 ms
64 bytes from fe80::2a0:deff:fe11:2233: seq=4 ttl=64 time=10.210 ms
--- fe80::2a0:deff:fe11:2233%vlan1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 2.681/7.554/10.210 ms

7.8.2 Check IPv6 route

[Syntax]
traceroute6 host
[Parameter]
host
[Input mode]
priviledged EXEC mode
[Description]
Shows information for the route to the specified host.
[Note]
[Example]
Check the route to 2001:db8:1::2.
SWR2311P#traceroute6 2001:db8:1::2
traceroute to 2001:db8:1::2 (2001:db8:1::2), 30 hops max
1 2001:db8:10::1 (2001:db8:10::1)
2 2001:db8:20::1 (2001:db8:20::1)
3 2001:db8:30::1 (2001:db8:30::1)
4 2001:db8:40::1 (2001:db8:40::1)
5 2001:db8:50::1 (2001:db8:50::1)
6 2001:db8:1::2 (2001:db8:1::2)

7.9 Set DNS lookup function

[Syntax]
dns-client switch
no dns-client
[Parameter]
switch
[Initial value]
dns-client enable
: Destination for which to check the route
Host name, or target IPv6 address (X:X::X:X)
: Behavior of the DNS client
Setting value
enable
disable
0.563 ms 0.412 ms
0.561 ms 0.485 ms
0.864 ms 0.693 ms
0.751 ms 0.783 ms
7.689 ms 7.527 ms
33.948 ms 10.413 ms
Description
Enable the DNS client
Disable the DNS client
Command Reference | Layer 3 functions | 205
0.428 ms
0.476 ms
21.104 ms
0.673 ms
7.168 ms
7.681 ms