Yamaha L2 Command Reference Manual page 255

[Parameter]
type : Type of map to show
policy
class
name : The name of the policy map (or class map) to show. If this is omitted, all policy maps (or class maps)
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows policy map or class map status information.
By using this command, you can obtain information about the combination of policy maps or class maps, such as the LAN/SFP
ports to which a policy map is applied, or the policy maps to which a class map is registered.
The following content is displayed.
policy-map
Item
input port
edit/erase
attach limitation
class-map
Item
policy-map asociation
edit/erase
attach limitation
Use the show policy-map and show class-map commands to check the settings of the policy map or class map.
[Note]
In order to execute this command, QoS must be enabled.
[Example]
Show the status of policy map "policy1".
SWR2311P#show qos map-status policy policy1
policy1 status
input port
edit/erase
attach limitation
CoS trust mode
DSCP trust mode
Port-Priority trust mode : Disable
Show the status of class map "class1".
SWR2311P#show qos map-status class class1
class1 status
policy-map association : policy1 (Detached)
edit/erase
attach limitation
CoS trust mode
DSCP trust mode
Port-Priority trust mode : Disable
Setting value
: port1.3
: Disable
: Enable
: Enable
: Disable
: Enable
: Enable
Command Reference | Traffic control | 255
Show policy map status information
Show class map status information
Display information
List of LAN/SFP ports to which the policy map is applied
Whether policy-map/no policy-map can be executed
Whether attachment is possible for each trust mode
Display information
List of policy maps to which the class map is associated
Whether class-map/no class-map can be executed
Whether attachment is possible for each trust mode
Description