ABB COM600 series User Configuration Manual page 18

Substation management units 5.1 sequence control

Hide thumbs Also See for COM600 series:

Table of Contents

COM600 series 5.1

Sequence Control Configuration Manual

3. Add additional STEPGGIO logical nodes depending on the number of steps intended

for the sequence being configured.

4. Repeat the steps 1 - 4 to add all the needed logical nodes (SEQGGIO1/ STEPGGIO*)

and associated data objects as defined in Table 3.4-1.

An example of a finished configuration for a four step sequence after all the logical nodes

and associated data objects have been defined is shown in Figure 3.4-2

Figure 3.4-2 Communication structure view for a four step sequence

1MRS755001

SAB600_SC_Four_Step_Sequence_Example.png

Table of Contents