ABB COM600 series User Configuration Manual page 62

62
COM600 series 5.1
Sequence Control Configuration Manual
2. Double-click the Start/Stop button and in the following dialog, click Start to begin
the sequence execution.
3. Before the execution of each step, the sequence pauses for manual acknowledgement.
Use the Manual mode acknowledgement control to acknowledge the sequence.
4. If needed, stop the sequence by double-clicking the Start/Stop object. In the follow-
ing dialog, click Stop.
Notice that as each step is executed, the corresponding breaker/switch mapped for
the step is controlled to the desired state. An example of a four-step sequence in
manual execution mode is shown in Figure 6.3-1.
Figure 6.3-1 An example of a four-step sequence in manual execution mode
1MRS755001
manual_mode_execution.png