Panasonic ET-PKD120H Installation Instructions Manual page 11

Installation (continued)
Pole base
To the screen
(Front)
"FRONT" inscription
Arrow
Secure with the supplied captive washer hex head bolts
Wire rope
2) Insert the temporarily fastened captive washer hex
Attention
z Hold the projector firmly until the captive washer
Hook hex head bolts are securely placed in the hook part
of the angle adjusting bracket.
WARNING:
Mounting and installation must be carried out
by two or more persons.
3) Secure the angle adjusting bracket to the pole
Attention
z After adjusting the installation angle on pages 13
to 14, securely tighten the captive washer hex
head bolt of the pole base in four places on right
and left.
4) Pass the wire rope through the hole of the
head bolts on either side into the hook section of
the angle adjusting bracket.
base using the supplied two captive washer hex
head bolts (M6 × 16), as illustrated on the left.
attachment plate as illustrated on the left.
ENGLISH - 11