Product Description - Panasonic ET-PKD120H Installation Instructions Manual

Product description

This is a ceiling mount bracket for installing projectors.
Use this together with the projector mount bracket (sold separately).
■ Applicable projector mount bracket
ET-PKE300B, ET-PKD130B, ET-PKD120B
* Products other than the above may be supported. Refer to the installation instructions for your projector mount bracket.
■ Structural components
Parts name
Attachment plate
Adjustment pole
Angle adjusting
bracket
Pole brace 1
Pole brace 2
Pole base
Screws and bolts
4 - ENGLISH
Form (number of parts)
Adjustment pole 1
× 1
Hex head bolt, captive washer (M6×80)
Hex head bolt, captive washer (M6×16)
Adjustment pole 2
M6 Flat washer
M6 Hex nut
Applications
The attachment plate is attached
to the ceiling via four ceiling
mount bolts.
Installation methods are different
for concrete and wooden ceilings.
It also allows horizontal swing
× 1 adjustment.
This is the adjustment pole
which is installed in between the
attachment plate and the projector
mount bracket.
It also includes a function for
adjusting the distance between
× 1 the ceiling and the projector itself.
This is attached to the projector
mount bracket.
It also allows vertical swing
adjustment.
× 1
This is attached to the attachment
plate to secure adjustment pole 1.
× 1
This is attached to the adjustment
pole 2.
× 1
This is attached to the pole brace
2.
× 1
× 2
× 2
× 2
These are used to assemble the
bracket and mount it onto the
projector.
× 30