Table of Contents
Advertisement
Product components
This is a ceiling mount bracket for installing projectors.
■ Applicable ceiling mount brackets and projectors
z Ceiling mount brackets
ET-PKD120H (for high ceilings) / ET-PKD120S (for low ceilings)
z Projectors
PT-MZ670 / PT-MW630 / PT-MZ570 / PT-MW530 / PT-EZ770 / PT-EZ590 / PT-EZ580 / PT-EZ57 / PT-EW730 /
PT-EW650 / PT-EW640 / PT-EW550 / PT-EW540 / PT-EX800 / PT-EX620 / PT-EX610 / PT-EX520 / PT-EX510 /
PT-FZ570 / PT-FW530 / PT-FX500
Note
z In this document, the alphabet letters at the end of the projector part numbers are omitted.
z Models other than the above may also be supported. Refer to the operating instructions of the projector you are using or the
website (https://panasonic.net/cns/projector/).
■ Structural components
Parts name
Projector mount
bracket
Bolts
Projector drop-
prevention kit
z Tightening torque for the screws are M6: 4 ± 0.5 N•m.
z When tightening up the screws, use a tool such as a torque screwdriver or torque wrench. Do not use electric
screwdrivers or impact screwdrivers.
Attention
z Dispose of the packaging materials properly after taking the product out of it.
z Store small parts in an appropriate manner, and keep them away from small children.
4 - ENGLISH
Form (number of parts)
Captive washer
hex head bolts
(M6×16)
Captive washer
Screw (M6×20)
Wire rope
[2.5 mm (3/32
)
"
wire diameter,
800 mm (31-1/2
)]
''
Flat washer (M8)
Applications
This is used to install the projector
itself.
× 1
It has a function which allows ad-
justment of the left and right tilt.
These are used to secure the
× 4
brackets to the projector.
× 1
Prevents the projector from falling.
× 1
× 2
Advertisement
Table of Contents
