NEC Express5800 Series User Manual page 23

Chapter 1 General Description
Expandability
• Various option slots
‒ PCI Express 3.0 (x16 lanes): 1 slot (Full height)
‒ PCI Express 3.0 (x16 lanes): 2 slots (Low profile) *8
‒ PCI Express 3.0 (x8 lanes): 1 slot (dedicated to RAID controller)
‒ PCI Express 3.0 (x8 lanes): 1 slot (dedicated to LOM card)
• Large capacity memory of up to 1.5TB *6
• Can upgrade to multi-processor system with up to two processors
• Expansion Bay (for hard disk drives): up to 11 slots
• Optical disk drive bay provided as an option
• USB3.0 interface (Front: 1 port, rear: 2 ports, internal: 2 ports)
• USB2.0 interface (Front: 1 port(optional))
• Management LAN port (1 port)
• With optional LOM card, two to four LAN ports can be added.
Ready to use
• No cable connection is required to install a hard disk drive and additional power supply unit (hot swap
supported).
• Slide rails for each installation
Many built-in Features
• Redundant power supply system supported (valid when optional power supply unit is installed)
• Software power-off
• Remote power-on feature
• AC-Link feature
• Remote console feature
• Power switch mask
• Connector for display unit provided on front panel
• Supports Redfish® API and incorporates baseboard management controller (iLO 5) which conforms to IPMI
v2.0
Self-diagnosis
• Power On Self-Test (POST)
Easy setup
• EXPRESSBUILDER (setup utility)
• System utility
*1: The Intel Xeon processor Bronze 3100 series is not supported.
*2: The device that mounts Intel Xeon processor Bronze 3100 series/Silver 4100 series/Gold 5100 series
executes one instruction simultaneously. The device that mounts Gold 6100 series/Platinum 8100 series
executes two instructions simultaneously.
Express5800/R120h-1E User's Guide
3. Features
23