Identifying Processor Type - NEC Express5800 Series User Manual

Chapter 2 Preparations
11. See Chapter 2 (1.5 Top Cover) to attach the top cover of the server.
12. Please see Chapter 2 (2. Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
1.7.4

Identifying processor type

The type of processor installed on the server is displayed simply on the POST. To view this information and
additional processor specifications follow the directions below
1. Reboot the server.
The server restarts and the POST screen is displayed.
2. Press <F9> key.
System Utility screen appears.
3. Select System Information > Processor Information.
More information about the processors installed on the server appears on the screen.
4. Keep pressing <ESC> key until the main menu is displayed.
5. The menu below will appear, select OK from the system utility and switch to boot mode.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/R120h-1E User's Guide
1. Installing Internal Optional Devices
65