Rear View - NEC Express5800 Series User Manual

Chapter 1 General Description
4.3

Rear View

(1) 1st iser card (slot1) (option)
R
Slots for installing full-height PCI cards.
(2) 1st Riser card (slot2) (option)
Slots for installing low-profile PCI cards.
(3) 2nd Riser card (slot3) (option)
Slots for installing low-profile PCI cards.
(4) Power Supply Unit (Selection option)
A power supply for supplying the DC power to
the server.
(5)
Power supply Unit (Power supply slot 1)
(Required option)
A power supply for supplying the DC power to
the server.
(6) Power supply unit 2 (power supply slot 2)
(option)
The second power supply unit.
It can be redundant if the second unit is
arranged.
(7) Serial Port (COM) Connector (option)
A connector for connecting serial interface
devices. This cannot directly connect to a
network line.
(8) LAN connectors
A connector for connecting a network
(1000BASE-T/100BASE-TX/10BASE-T)
(9) Display Connector
A connector for connecting a display.
*1 2nd riser card (Solt 3) can be used with 2CPU configuration.
28
(10) Management LAN Connector
(11) USB 3.0 Connectors
(12) LOM card (optional LAN3, LAN4)
Express5800/R120h-1E User's Guide
4. Names and Functions of Parts
A LAN connector which supports 1000BASE-T/
100BASE-TX/10BASE-T.
Incompatible as LANs for regular OS.
This port is used for connecting to iLO.
Connectors for connecting USB 3.0 interface
devices.
This is an optional LOM card that can be
connected directly to the mother board.
• N8104-193 1000BASE-T connection LOM
card (2ch)
• N8104-194 10GBASE connection LOM card
(SFP+/2ch)
• N8104-195 10GBASE-T connection LOM card
(2ch)