ABB Relion 630 Series Quick Start Manual

Quick Start Guide
Relion 630 series
®
4
5
1 Display
2 Self-supervision and
protection indicator LEDs
3 Programmable LEDs
4 Function buttons
5 Object control buttons
6 Escape / Cancel
7 Navigation buttons
8 Enter
9 Authorization
10 Clear
11 LED text view
12 Menu
13 Remote / Lemote
14 Help
15 Front communication port
2
1
6
Default view can be selected from e.g. single line diagram (SLD), measurement, events
Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF), Start-LED steady: protection started,
Start-LED flashing: protection function blocked, Trip-LED: protection operated
Can be programmed for alarming and indication with latching and/or flashing features in 3 colors
Can be configured either as menu shortcuts or control buttons
Press open/close and confirm by pressing enter. If there is more than one controllable object select the object
first with navigation buttons. Note: R/L button has to be in Local mode
Used for canceling actions and leaving setting mode without saving the values. Returns back to menu.
Left = go back, Right = go further, Up = scroll up, Down = scroll down. Up/down can also be used when
selecting controllable objects like breakers and switches in single line diagram.
Entering to parameter setting mode and confirming new values or selection in dialogs
If authorization is used you can log in or log out using this button
Clearing events and indications, see next page for further details
Multipage programmable LED text view. Press to see the 3 sets of 15 LED texts
Switch views in between the main menu and default view
Changes the control between Local/Remote
View help menu
RJ-45 connection
8
7
9
3
10
11
12
14
15
13