Description; Area Of Application; Ce Marking - Siemens SIMOTICS SD Operating Instructions Manual

Description

3.1

Area of application

Overview
The three-phase machines of this series are used as industrial drives. They are designed for
a wide range of drive applications both for line operation as well as in conjunction with
frequency converters.
They are characterized by their high power density, extreme robustness, long service life
and outstanding reliability.
Intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). Their use in hazardous areas is
forbidden unless the marking on the rating plate expressly permits this operation. If
other/more wide-ranging demands (e.g. protection so that they cannot be touched by
children) are made in special cases – i.e. use in non-industrial installations – these conditions
must have been complied with in the plant or system itself when the motors are installed.
Note
Machine directive
Low-voltage motors are components designed for installation in machines in accordance
with the current Machinery Directive. They must not be commissioned until it has been
verified that the end product complies with this directive (refer to EN 60204-1).
3.1.1

CE marking

Note
Use of machines without CE identification
Machines without
Area (EEA). Do not use any machines without CE mark within of the EEA!
Low-voltage motors
Operating Instructions, 05/2014, 5 610 00000 02 000
marking are intended for operation outside the European Economic
3
15