Siemens SIMOTICS SD Operating Instructions Manual page 77

Switching on the anti-condensation heater
If an anti-condensation heater is provided, switch it on during the machine stoppages.
Taking the machine out of service
For details of measures that need to be implemented, please refer to Section Preparing for
use (Page 27).
Lubricating before recommissioning
NOTICE
Dry running bearings
Bearings can be damaged if they do not have sufficient grease.
Re-grease the bearings if they have been out of service for more than one year. The shaft
must rotate so that the grease can be distributed in the bearings. Observe the data on the
lubricant plate.
See also Chapter, Maintenance - bearing service life.
Low-voltage motors
Operating Instructions, 05/2014, 5 610 00000 02 000
Operation
8.2 Stoppages
77