Regulations - Siemens SIMOTICS SD Operating Instructions Manual

Description
3.3 Installation
3.3.2

Regulations

Standard motors
The regulations and standards used as basis to design and test this machine are stamped
on the rating plate. The machine design basically complies with the following standards:
Table 3- 1 Applicable general regulations
Feature
Dimensioning and operating behavior
Procedure for determining the losses and the efficiency of rotating electrical machines and
inspections
Degree of protection
Cooling
Type of construction
Terminal designations and direction of rotation
Noise emission
Starting characteristics of rotating electrical machines
Vibration severity grades
Efficiency classification of three-phase squirrel-cage induction motors
IEC standard voltages
Supplementary regulations for explosion-proof machines
Table 3- 2 Regulations applied for explosion-protected machines
Feature
Electrical equipment for hazardous gas atmospheres, Part 0: General requirements
Electrical equipment for hazardous gas atmospheres, Part 1: Flameproof enclosure "d"
Electrical equipment for hazardous gas atmospheres, Part 7: Increased safety "e"
Electrical equipment for hazardous gas atmospheres, Part 14: Electric installations for
endangered atmospheres (except underground excavation)
Electrical equipment for hazardous gas atmospheres, Part 15: Type of protection "n"
Electrical equipment for hazardous gas atmospheres, Part 19: Repairs and overhauls
Potentially explosive atmosphere - Part 31: Device dust explosion protection by enclosure "t"
Electrical equipment for use in the presence of combustible dust - Part 17: Inspection and
maintenance of electrical systems in hazardous areas (except underground excavation)
Directive on the approximation of the laws of the Member States concerning equipment and
protective systems intended for use in hazardous areas.
18
Standard
EN / IEC 60034-1
EN / IEC 60034-2-1
EN / IEC 60034-2-2
EN / IEC 60034-2-3
EN / IEC 60034-5
EN / IEC 60034-6
EN / IEC 60034-7
EN / IEC 60034-8
EN / IEC 60034-9
EN / IEC 60034-12
EN / IEC 60034-14
EN / IEC 60034-30
IEC 60038
Standard
EN / IEC 60079-0
EN / IEC 60079-1
EN / IEC 60079-7
EN / IEC 60079-14
EN / IEC 60079-15
EN / IEC 60079-19
EN / IEC 60079-31
EN / IEC 60079-17
RL94/9/EC
Operating Instructions, 05/2014, 5 610 00000 02 000
Low-voltage motors