Storage; Disposal; Troubleshooting - Silvercrest SKMD 1000 A1 KAT Operating Instructions Manual

and then switch off the device by press-
ing 18.
9. Leave the descaling agent to work for
approx. 30 minutes.
10.Switch the coffee machine 6 on by
pressing 18 and allow the rest of the
descaling agent to run through.
11.The red LED 19 goes off approx. 2 min-
utes after the end of the brewing pro-
cess.
12.Empty the thermal jug 8 and rinse it out
with water.
13.Fill the water tank 4 with clear water
twice more up to the 8 cup marking
and start the brewing process.

9. Storage

DANGER for children!
Keep the device out of the reach of chil-
dren.
1. Clean the coffee machine 6 and rinse
out the thermal jug 8.
2. Leave the cleaned coffee machine 6
and the cleaned accessories to dry be-
fore you assemble them and put them
away.

10. Disposal

This product is subject to the
provisions of European Di-
rective 2012/19/EC. The
symbol showing a wheelie
bin crossed through indi-
cates that the product re-
quires separate refuse
collection in the European
Union. This applies to the
product and all accessories
marked with this symbol. Products identified
with this symbol may not be discarded with
normal household waste, but must be taken
to a collection point for recycling electric
and electronic appliances. Recycling helps
to reduce the consumption of raw materials
and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
No function
• Check the connection.
The quality of
the coffee
brewed is be-
coming worse. • The coffee machine 6
The boiling
process takes
longer for the
same volume.
The lid 1 of the • Is the filter holder 11
coffee machine
does not close
properly.
Possible causes/
Action
connected to the pow-
er supply?
needs to be descaled.
correctly inserted into
the coffee machine 6?
GB
25