Adjusting The Paper-End Detector - Epson TM-L60 Operator's Manual

3-2 Adjusting the Paper-end Detector

n The paper-end detector
The paper-end detector senses when the paper is nearing its end and turns on the
PAPER lamp.
The paper-end detector can be adjusted according the thickness of the paper.
n How to adjust the paper-end detector
Roll paper may differ in spool size, so it may be necessary to adjust the paper-end
detector.
Use the specified thermal paper roll with a core inside diameter (d1) of 12 mm
and an outside diameter (d2) of 18 mm, or the specified thermal label paper
with a core inside diameter (d1) of 12 mm and an outside diameter (d2) of 22
mm.
The thickness of the spool can vary; use the table to determine the paper-end
detector adjustment.
Table 3-l. Adjustment Values of the Paper-end Detector
Adjustment
Value
Specified thermal paper
# l
#2
#3
#4
#5
#6
d2 018 (specified thermal paper)
Dimension of T (mm)
Approx. 0
Approx. 2
Approx. 4
Approx. 6
Approx. 8
Approx. 10
022 (specified thermal label paper)
Specified thermal label paper
10
Do not use
Approx. 0
Approx. 2
Approx. 4
Approx. 6
Approx. 8