Cleaning The Head - Epson TM-L60 Operator's Manual

5-5 Cleaning the Head

n n Cleaning the head
Clean the head according to the following procedure.
CAUTION:
Do not clean the head immediately after printing; the head may be hot.
l
Open the roll-paper cover, raise the auto-cutter and the head-open lever. If roll
paper is loaded, remove it from the head area.
Clean the heating element of the head with a cotton swab containing an alcohol
solvent (ethanol, methanol, or IPA).
Clean the cutter also with an alcohol solvent.
l
CAUTION:
Never touch the head; oils on your skin can damage the head.
l
Push the head-open lever down. Reload roll paper and close the roll-paper
cover. See 3-l.
23