Epson TM-L60 Operator's Manual page 54

W i t h c o u n t - d o w n
l
l
T o s t o p c o u n t i n g
l
l
l
[Notes]
l
W i t h c o u n t - u p
l
With count-down
l
[Default] n1 + n2 x 256 = 1, n3 + n4 x 256 = 65535, n5 = 1, n6 = 1
[Reference] GS CO, GS C2, GS c, GS C;
GS C2 n1 n2
[Name] Set counter
[Format] <1D>H<43>H<32>H<n1><n2>
0
[Range]
0
[Description]
Sets the value of the serial number counter.
l
[Notes]
l
With counting up
l
W i t h c o u n t i n g d o w n
l
Counts down n1 + n2 x 256 > n3 + n4 x 256, n5
0.
n1 + n2 x 256 means the maximum counter value and n3 + n4 x
256 the minimum counter value.
Stops counting if n1 + n2 x 256 = n3 + n4 x 256, n5 = 0, or n6 =
0 .
n5 indicates the stepping amount when counting up or down.
n6 indicates repetition number with the counter value being
fixed.
When this command is issued, the inner counter that indicates
the repetition number specified by n6 will be cleared.
If counting up reaches a value exceeding the maximum, it is
resumed with the minimum value.
If counting down reaches a value less than the minimum, it is
resumed with the maximum.
n1 2 5 5
n2 2 5 5
n1 + n2 x 256 is the counter value.
When this command is issued, the inner counter that counts
repetition number with the counter value fixed will be cleared.
If the counter value set by this command goes out of the counter
operation range set by GS Cl or GS C;, it will be forced to
convert to the minimum value by GS c.
If the counter value set by this command goes out of the counter
operation range set by GS Cl or GS C;, it will be forced to
convert to the maximum value by GS c.
48
0, and n6