Epson TM-L60 Operator's Manual page 68

Character structure:
Character size:
Standard
W X H ( m m ) C P L W X H ( m m ) C P L W X H ( m m ) C P L W X H ( m m ) C P L
Font A 1.41 X 3.39
(12 X 24)
Font B 0.99 X 2.40
(9 x 17)
Space between characters is not included.
CPL = Character per line.
NOTE: Concerning CPL in the table above, the upper value is for thermal paper
and the lower for label paper.
3. Near-end detector
Detection method:
Roll paper core diameter:
Specified thermal paper:
Specified thermal label paper:
Adjustment mechanism:
Adjustment units:
4. Paper
4.1 Thermal paper
Paper type:
Paper thickness:
Form:
Font A:
Font B:
Default:
1.41 mm (W) X 3.39 mm (H) (Font A)
0.99 mm (W) X 2.40 mm (H) (Font B)
Table A-l. Character Sizes
Double-height
32 1.41 X6.77
30
42 0.99 X 4.80
40
Outside diameter:
The near-end detection processing is
Approx. 2 mm/scale division
Specified thermal paper
65 ±5 µm
Roll paper
62
12 x 24 (includes the horizontal 2-
dot space)
9 x 17 (includes the horizontal 2-
dot space)
Font A
Double-Width
32 2.82 X 3.39 16 2.82 X 6.77 16
30 15
42 1.98 X 2.40 21 1.98 X 4.80 21
40 20
Micro switch
Inside diameter:
Inside diameter:
Outside diameter:
Adjusting screw
program table by control command.
Quadruple
15
20
12 mm
18 mm
12 mm
22 mm