Epson TM-L60 Operator's Manual page 37

Sets the bit-image mode using m and the number of dots using
[Description]
n1 and n2.
l
l
l
The bit image modes selectable by m are as follows:
l
m Mode
0
8-dot single-density
8-dot double-density
1
32 24-dot single-density
33 24-dot double-density
[Notes] If m is out of range, n1 and the data following will be processed
.
l
l
Divide the number of dots to be printed by 256. The integer an-
swer is n2 and the remainder is n1. Therefore, the number of
dots in the horizontal direction is: n1 + 256 X n2.
If the bit-image data input exceeds the number of dots to be
printed on a line, the excess data is ignored.
"d" indicates the bit image data. Set a corresponding bit to 1 to
print a dot, otherwise set it to 0.
Vertical Direction
Number of
dots
8
8
24
24
as normal data.
After printing a bit image, the printer returns to normal data pro-
cessing mode.
The relationship between the image data and the dots to be
printed is as follows:
Horizontal Direction
Dot
Density Density
60 DPI 90 DPI
80 DPI 180 DPI
90 DPI
180 DPI
180 DPI
180 DPI
Single-density
31
Maximum
Number
of Dots
Normal Label
192 184
384 368
192 184
384 368
Double-density