Sharp UX-CD600 Operation Manual page 108

Making Copies
If MEMORY IS FULL appears...
If the memory becomes full while a document is being scanned, MEMORY IS
FULL and SEE MANUAL will alternately appear in the display and the
document will automatically feed out. This may happen if the resolution is set
to SUPER FINE, or if you selected an enlarge/reduce setting, or if you are
making more than one copy per original. To avoid using memory, use
STANDARD or FINE for the resolution, 100% for the enlarge/reduce setting,
and make only one copy per original.
Copy Cut-off
When making a copy of a document that is longer than the printing paper, use
the copy cut-off setting to select whether the remaining part of the document
will be cut off or printed on a second page. The initial setting is YES (cut off
the remainder). To change the setting, follow the steps below.
1
FUNCTION
Press
2
Press
3
Press
4
Press
(the remaining part of the document
will not be printed), or
cut-off to NO (the remaining part will be
printed on a second page).
5 STOP
Press
106
once and
once and 3 times.
once.
to set copy cut-off to YES
to set copy
to return to the date and time display.
once.
Display:
OPTION SETTING
COPY CUT-OFF
COPY CUT-OFF
1=YES, 2=NO
The display briefly shows
your selection, then:
DIALING LINE