Sending a Fax From Memory
You can scan a document into the machine's memory and send the document
from memory. This increases transmission speed and allows you to send a fax
to multiple destinations in a single operation. After transmission, the
document is automatically cleared from memory.
♦
When you send a fax from memory, the machine will normally use line 2.
The machine will only use line 1 if line 2 is busy (or if line 2 is not connected
or disabled).
Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
destinations in just one operation.
♦
When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
START/MEMORY
2
Press
3
Press
(or
display (if no name was stored, the number will appear).
4
Press
to select the destination.
RESOLUTION/
RECEPTION MODE
to set the
.
) until the name of the destination appears in the
Sending a Fax From Memory
95