Sharp UX-CD600 Operation Manual page 136

Messages and Signals
VOICE MAIL
VOICE MAIL 2
Display messages (cordless handset)
BUSY
CALL TRANSFER
CHARGING
CHECK FAX
CONFERENCE
HANDSET?
HOLD
134
This only appears if you have subscribed to a voice
mail service from your phone company (see page
38). VOICE MAIL indicates that you have new
messages in your voice mail service on line 1. VOICE
MAIL 2 indicates that you have new messages in your
voice mail service on line 2.
Note: If you have voice mail messages on both lines
1 and 2 (and/or messages in the machine), only
VOICE MAIL will appear. If you have voice mail
messages on line 2 and messages in the machine,
only VOICE MAIL 2 will appear ("TOTAL MSGS:XX"
will not appear).
The system is busy (phone/fax on line 2, intercom,
and accessing the machine from a cordless handset
to listen to messages, etc., cannot take place
simultaneously). Wait until the system is free to use
the cordless handset.
A call is being transferred.
The cordless handset is in the charger and the
battery is charging.
This appears when a problem in the machine
prevents you from storing or editing an auto-dial
number from the cordless handset. The machine's
display shows a message indicating the problem.
A conference call is taking place (see page 56).
The cordless handset is outside of the talking range
of the machine, the power of the machine is off, or the
cordless handset has not been registered in the
machine. See page 130.
A call has been placed on hold by pressing the HOLD
key. To resume the call, press the HOLD key again.