Sharp UX-CD600 Operation Manual page 76

Transfer Function
6 STOP
Press
Recording the transfer message
The transfer message plays when you answer the telephone, and informs you
that the call is a transfer call. The following is an example:
"Hello. This is a transfer call for (YOUR NAME). Enter your remote code
number now."
1
Press
REC/
MEMO
2
Press
3 START/MEMORY
Press
record the message.
•
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
4
When finished, press
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press
the message.
Turning the Transfer function on and off
When you go out and wish to use the Transfer function, turn it on as follows:
74
to return to the date and time display.
once and
once.
and speak facing "MIC" on the operation panel to
STOP
PLAY/
HOLD
twice.
.
to check the message, or
Display:
FEB-20 10:30
OGM (TRANSFER)
FEB-20 10:30
START: RECORD
to erase
DELETE