Table of Contents
Advertisement
♦
Automatic fax reception NO: The machine will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see Remote Operations on page 76).
The initial setting is NO . If you want to change the setting to YES, press the
panel keys as follows:
1
FUNCTION
Press
2
Press
once and
3
Press
once.
4
Press
to select YES (turn on
automatic fax reception), or
select NO.
5
STOP
Press
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message
(this applies to all boxes). The machine will receive faxes sent by auto dialing.
(Note: If the machine initially answers a call in Auto Attendant mode and then
switches to OGM only mode (TAD mode) because nobody answers the paged
device, fax reception will not be possible.)
1
FUNCTION
Press
2
Press
once and
once and
once.
4 times.
to return to the date and time display.
once and
once.
3 times.
Optional Answering System Settings
Display:
T.A.D. SETTING
ON TAD FAILURE
ON TAD FAILURE
1=YES, 2=NO
The display briefly shows
your selection, then:
to
OGM ONLY MODE
Display:
T.A.D. SETTING
OGM ONLY MODE
71
Advertisement
Table of Contents
Troubleshooting
