ABB COM600 Station Automation Series User Manual page 35

1MRS756566 COM600 Station Automation Series
User's Guide
Property/ Para- Value or Value range/ Default
meter
Phase BC Index -1 to 65535
Default: -1
Phase CA Index -1 to 65535
Default: -1
Sub-Type
Subtype DEL Simple
Data Class Spe-
cific
Indication Object Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Scale and Unit
Phase Multiplier Default: Deka
Phase Number of 0 to 9
Decimals
Default: 0
Scale Default: None
Unit Default: Dimensionless
Table 3.4.8.8-2 Additional configurable properties for Sub-Type Limit Check
Property/ Para- Value or Value range/ Default
meter
Sub-Type DEL Full
Limit Value Super-
vision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0
LAN/WAN Master
Description
Phase BC Index
Phase CA Index
DEL Subtype
Object number for indication.
Specifies the multiplier for current SI unit.
Specifies the number of decimals shown
in HSI.
Scale to be used with this type.
SI unit for measurement as described in
IEC61850
Description
Sub-type of current data object
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
DNP 3.0
(OPC) 3.2
35