Igmp/Mld - D-Link AC1200 User Manual

Section 4 - Configuration
The IGMP/MLD page allows you to enable/disable Internet Group
Management Protocol (IGMP) and Multicast Listener Discovery (MLD). IGMP
is used to managed multicast traffic for IPv4-based networks. MLD is used to
manage multicast traffic in IPv6-based networks.
IGMP
Enable/Disable: Toggle this switch to enable/disable IGMP.
IGMP version
Choose from drop down list which IGMP version to use.
Interface:
Choose from drop down list which interface to apply to
Enable/Disable:
Toggle this switch to set the address of outgoing IGMP packets equal
to 0.0.0.0
MLD
Enable/Disable: Toggle this switch to enable/disable MLD.
MLD Version: Choose from drop down list whether to use MLDv1/MLDv2, Only
MLDv1, or Only MLDv2.
Interface: Choose from drop down list the interface to use.
Click APPLY when finished.
D-Link DIR-1210 User Manual

IGMP/MLD

113