D-Link AC1200 User Manual page 27

Section 4 - Configuration
This section allows you to configure your WAN interface in detail.
Under Basic, you will see the following:
Connection Type:
Select your connection type from drop-down menu:
For Dynamic IPv4 refer to page 24.
For Static IPv4 refer to page 27
For Dynamic IPv6 refer to page 31
For Static IPv6 refer to page 35
For PPPoE refer to page 38
For PPPoE IPv6 refer to page 42
For PPPoE Dual Stack refer to page 47
For PPTP refer to page 52
For L2TP refer to page 56
Note: this option can only be edited in the WAN/Creating mode.
Toggle this switch to clone the MAC address of your NIC.
Click Apply when you are done.
D-Link DIR-1210 User Manual
WAN/Editing and WAN/Creating
23