D-Link AC1200 User Manual page 36

Section 4 - Configuration
All Settings
Connection Type: Select your connection type from drop-down menu:
For Dynamic IPv4 refer to page 24.
For Static IPv4 refer to page 27
For Dynamic IPv6 refer to page 31
For Static IPv6 refer to page 35
For PPPoE refer to page 38
For PPPoE IPv6 refer to page 42
For PPPoE Dual Stack refer to page 47
For PPTP refer to page 52
For L2TP refer to page 56
Note: this option can only be edited in the WAN/Creating mode.
Enable Toggle this switch to enable the connection. This is enabled by default.
Connection:
Disabling this feature may disable your Internet connection.
IPv6
Get IPv6: Choose Automatically, IPv6 by DHCPv6, by SLAAC, or DHCPv6 PD
according to the type of IPv6 is used by your ISP. The default setting
is Automatically.
Gateway by Toggle this switch to obtain gateway information through SLAAC.
SLAAC:
If Gateway by SLAAC is disabled, specify the Gateway IPv6 address
Gateway IPv6
address:
here.
D-Link DIR-1210 User Manual
Dynamic IPv6 (cont)
32