Table 7-2 Tightening Torques For Power Terminals - Siemens Micromaster 440 Operating Instructions Manual

Issue 12/02
Electromagnetic Compatibility
Braking
Protection Level
Temperature range
Storage Temperature
Humidity
Operational Altitudes
Protection Features
Standards
CE Marked
Table 7-2 Tightening torques for power terminals
Frame Size
A
B
C
D
E
F
FX
GX
MICROMASTER 440
6SE6400-5AW00-0BP0
Frame Sizes A to C:
Frame Sizes A to F:
Frame Sizes FX and GX: With EMI filter (available as an option) the limiting
DC braking, compound braking
Dynamic braking
IP20
Frame Sizes A to F:
Frame Sizes FX and GX: 0 °C to +40 °C (32 °F to 104 °F),
Power reduction see Figure 2-2
-40 °C to +70 °C (-40 °F to 158 °F)
< 95 % RH – non-condensing
Frame Sizes A to F:
Frame Sizes FX and GX: Up to 2000 m above sea level without derating
Undervoltage , Overvoltage, Overload, Ground Faults, Short circuit, Stall
Prevention, Motor Blocking Protection, Motor Overtemperature, Inverter
Overtemperature, Parameter Interlock
Frame Sizes A to F:
Frame Sizes FX and GX: UL (in preparation), cUL (in preparation), CE
Conformity with EC Low Voltage Directive 73/23/EEC
and filtered versions also Electromagnetic Compatibility Directive 89/336/EEC
Tightening Torque [Nm]
1,1
1,5
2,25
10 (max.)
10 (max.)
50
25
25
Operating Instructions
7 MICROMASTER 440 specifications
optional class A or B filters available according to
EN55011
inverter with integrated class A filter available
values of the EN 55011, Class A are fulfilled for
conducted emission.
(line commutating choke required)
Frame Sizes A to F with integrated chopper
Frame Sizes FX and GX with external chopper
-10 °C to +50 °C (14 °F to 122 °F) (CT)
-10 °C to +40 °C (14 °F to 104 °F) (VT)
up to 55 °C (131 °F)
Up to 1000 m above sea level without derating
UL, cUL, CE, C-tick
107