Panasonic GT Series Manual page 120

Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT (Set in the configuration setting of GTWIN.)
Item
Baud Rate
Data Length
Stop Bits
Parity Bit
Setting Values for PLC
Setting for MICRO-EH
Port1
The settings for the dip switches and the special internal output are required.
Specify as follows
Item
Port type
Procedure of communication control
Baud rate
* For the details of the method of communication setting, refer to the "EH-SIO Application Manual".
9-12
Setting
19200bps
7
1
Even
Setting for special port
Procedure 1 of transmission control (No unit No.)
19200 bps
Setting