Kv-1000 Series Connected Using Unit Kv-L20R/V - Panasonic GT Series Manual

8.5 KV-1000 Series Connected using Unit KV-L20R/V

PLC model selection
Select "Keyence KV-1000 Series".
The following version of GTWIN is required to select "Keyence KV-1000 series" from the PLC model
selection. When the version of your GTWIN is older than the one below, select "Keyence KV-700 series".
In that case, the range of usable devices is the same as the one for Keyence KV-700 series.
GT GTWIN Version
GT01 Ver.2.90 or later
GT02 Ver.2.A0 or later
GT02L Ver.2.B0 or later
GT03-E Ver.2.E0 or later
GT05 Ver.2.90 or later
GT11 Ver.2.90 or later
GT12 Ver.2.97 or later
GT21 Ver.2.90 or later
GT32 Ver.2.90 or later
GT32-E Ver.2.C0 or later
Usable devices
Bit/Word Device
Relay
Control Relay
Timer
Bit Device
Counter
High-speed Counter Comparator
Data Memory
Word
Control Memory
Device
Temporary Data Memory
Digital Trimmer
Timer(set Value)
Counter(set Value)
Double
High-speed Counter Comparator(set
Word
Value)
Device
Timer(current)
Counter(current)
High-speed Counter Comparator(current) CTC0-CTC3
8-10
GT Version
Ver.1.33 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.23 or later
Ver.1.00 or later
Ver.1.13 or later
Ver.1.00 or later
Ver.1.00 or later
00000-59915
CR0000-CR3915
T000-T511
C000-C511
CTC0-CTC3
DM00000-DM39999
CM0000-CM3999
TM000-TM511
AT0-AT7
T/TC000-T/TC511
C/CC000-C/CC511
CTH0-CTH1
T/TS000-T/TS511
C/CS000-C/CS511
No.
It is not possible to output
it.
Memo