Kv-10/16/24/40 Series; Series - Panasonic GT Series Manual

8.1 KV-10/16/24/40 Series

PLC model selection
Select "Keyence KV-10/16/24/40
Confirm the appropriate versions of GTWIN and GT to connect with Keyence KV-10/16/24/40

series.

GT series GTWIN Version
GT01 Ver.2.80 or later
GT02 Ver.2.A0 or later
GT02L Ver.2.B0 or later
GT03-E Ver.2.E0 or later
GT05 Ver.2.90 or later
GT11 Ver.2.80 or later
GT12 Ver.2.97 or later
GT21 Ver.2.80 or later
GT32 Ver.2.80 or later
GT32-E Ver.2.C0 or later
Usable devices
Bit/Word Device
Relay
Timer
Bit Counter
Device
High-speed Counter/CTH
High-speed Counter Comparator
Data Memory
Temporary Data Memory
Digital Trimmer
Timer(current value)
Counter(current value)
Word
High-speed counter/CTH (current value)
Device
High-speed Counter Comparator(current Value) CTCC0-CTCC3
Timer(set value)
Counter(set value)
High-speed counter/CTH (set value)
High-speed Counter Comparator(set value)
Note1) The high-speed counter comparator cannot output.
Note2) It takes some time for communicating due to limitations of PLC communication protocol.
Therefore, the speed of screen change may be slower, or the response of the touch switches
may be worse.
8-2
series".
GT Version
Ver.1.31 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.00 or later
Ver.1.21 or later
Ver.1.00 or later
Ver.1.11 or later
Ver.1.00 or later
Ver.1.00 or later
No.
00000-17915
T000-T249
C000-C249
CTH0-CTH1
It is not possible to
CTC0-CTC3
output it.
DM0000-DM1999
DM0000-DM1999
AT0-AT1
TC000-TC249
CC000-CC249
CTHC0-CTHC1
TS000-TS249
CS000-CS249
CTHS0-CTHS1
CTCS0-CTCS3
Memo