Querying The Stk Main Menu; Reference Process - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide
Scenario
AT+CUSATT="<terminal_re
sponse>"

14.2 Querying the STK Main Menu

14.2.1 Reference Process

Command
AT^CUSATM?
^CUSATM:
"D081A2810301250082028182850F80005500530049
004D53615E9475288F0A11807CBE54C163A883508
F0A318059296C14988462A58F0A3280822A73ED67
E58BE28F0A338051FA884C630753578F0A34804F5
3575B5FEB8BAF8F0C518065B095FB65E9665A62A
58F0A5280624B673A97F34E508F0A5380624B673A
96058BFB8F0A5480624B673A90AE7BB18F0A55807
7ED4FE152A974068F0C5680624B673A84254E1A53
85"
OK
Issue 02 (2013-09-18)
Possible Error
Information
ERROR
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
STK Application Scenarios
Solution
1. Use AT^STSF? to check
whether STK has been
activated and the interface has
been set to 3GPP standard
mode. If yes, proceed to the
next step.
2. Check whether the proactive
command reported needs to be
processed by the CAT client. If
yes, proceed to the next step.
3. Check whether
<terminal_response> complies
with the 3GPP TS 31.111
protocol. If yes, proceed to the
next step.
4. Check whether the terminal
response is delivered more than
2 minutes and 5 seconds after
the proactive command is
reported. If yes, the module
does not receive terminal
responses sent from the CAT
client.
Description
Check the content of
SET UP MENU.
Content of SET UP
MENU
109