Setting Fota Connection Parameters; Reference Process; Troubleshooting - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

16.3 Setting FOTA Connection Parameters

16.3.1 Reference Process

Command
AT^FOTACFG="cmnet","","",2 Set the APN to cmnet and authentication mode
OK
AT^FOTACFG?
^FOTACFG: "cmnet","","",2
OK
Notes:

16.3.2 Troubleshooting

Scenario
An error message is
returned.
An error message is
returned.
Issue 02 (2013-09-18)
Parameter settings are all saved upon power-off.

 This command does not provide a test command. For details, see the latest version of
MU609 V100R002 in HUAWEI MU609 HSPA LGA Module AT Command Interface
Specification.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
to CHAP. Leaves the user name and password
blank. These parameters should be set
according to the contracted values.
Query the current settings.
Possible Error
Information
+CME ERROR:
Operation not supported
+CME ERROR: Error
command parameters
FOTA Application Scenarios
Solution
The operation is not
supported. For details,
see the latest version of
MU609 V100R002 in
HUAWEI MU609 HSPA
LGA Module AT
Command Interface
Specification.
The parameter is
incorrectly set. For
details, see the latest
version of MU609
V100R002 in HUAWEI
MU609 HSPA LGA
Module AT Command
Interface Specification.
120