HUAWEI MU609 HSPA LGA Module
Application Guide
15.1 USSD Initialize and Configration
15.1.1 Reference Process
Command
AT+CSCS="IRA"
OK
AT^USSDMODE=0
OK
Notes:
15.1.2 Troubleshooting
Scenario
The parameter is out of the
correct range.
Issue 02 (2013-09-18)
15
USSD Application Scenarios
The default transmitted mode is transparent mode.
In non-transparent transmission mode:
When running AT+CSCS="IRA", the MT will transfer the USSD string to GSM 7bit directly;
When running AT+CSCS="UCS2", the MT will encode every four characters of the USSD
string as hexadecimal.
In transparent transmission mode, the USSD string is not controlled by AT+CSCS. The MT
will transfer the USSD string to hexadecimal directly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Set the Te supported character set
as "IRA"
Set the transmitted mode, select
USSD non-transparent mode
Possible Error
Information
ERROR
USSD Application Scenarios
Solution
Refer to the AT command
document.
112