Send The Ussd Command In Non-Transparent Mode; Reference Process - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

15.2 Send the USSD Command in non-Transparent Mode

15.2.1 Reference Process

Command
AT^USSDMODE=0
OK
AT+CSCS="IRA"
OK
AT+CUSD=1,"*133*950#",15
OK
+CUSD:
1,"0031002E80A17968537365F6884C60
C5000A0032002E80A18BC4000A003300
2E90FD5E02751F6D3B000A0034002E5F
697968000A0035002E751F6D3B5B9D51
78000A0036002E65F65C1A751F6D3B00
0A0037002E5A314E504F1195F2000A00
38002E516C51714FE1606F000A0039002
E592753434E16754C000A002A002E900
051FA000A0000",72
AT+CUSD=2
OK
AT+CSCS="UCS2"
OK
AT+CUSD=1,"00310032",15
OK
+CUSD: 2
Note:
Issue 02 (2013-09-18)
"*133*950#" is just available in China Mobile network in Shen Zhen area. The USSD code is
various in different network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
USSD Application Scenarios
Description
Set as non-Transparent mode
Set the TE supported character set
as "IRA"
Send the USSD code to network.
The network sends the menu
information to the TE.
End the USSD session
Send the USSD code to network,
encoded as UCS2.
The network does not support.
113