Technical Specifications; Standards And Approvals - Siemens SIMATIC S7-1500 Automation System System Manual

Technical specifications

15.1

Standards and Approvals

Introduction
Contents of general technical specifications:
● The standards and test values that the modules of the S7-1500 automation system
● The test criteria according to which the S7-1500 automation system was tested.
Technical specifications for the modules
The technical specifications of the individual modules can be found in the manuals of
respective modules. In the event of deviations between the statements in this document and
the manuals, the statements in the product manuals take priority.
Reference
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://www.siemens.com/automation/service&support).
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
comply with and fulfill.
Note
Information on the components of the S7-1500 automation system
The current valid markings and approvals are printed on the components of the S7-1500
automation system.
15
163