Dimension Drawing Of Load Power Supply, 75 Mm Wide - Siemens SIMATIC S7-1500 Automation System System Manual

Note
Minimum clearances
Observe the minimum clearances of 25 mm, above and below the mounting rail, as
described in the chapterMounting (Page 39).
A.9

Dimension drawing of load power supply, 75 mm wide

In this appendix you will find the dimension drawing of the load power supply installed on a
mounting rail, as well as a dimension drawing with open front cover. Always observe the
specified dimensions for installation in cabinets, control rooms, etc.
Figure A-20
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
A.9 Dimension drawing of load power supply, 75 mm wide
Dimension drawing of load current supply (75 mm wide), front and side views
Dimension drawings
187