Siemens SIPROTEC 5 Technical Data Manual page 109
High-voltage bay controller, v7.80 and higher
Hide thumbs
Also See for SIPROTEC 5:
- Manual (490 pages) ,
- Operation manual (218 pages) ,
- Hardware description manual (63 pages)
Table of Contents
Advertisement
Technical Data
11.37 Voltage Controller
Measured Value Description
ΔVactC
Measured Values for Parallel Control, Proxy
Measured Value Description
V act.
1/X trf.
I load
PhAng
Measured Values, Three-Winding Transformer
Measured Value Description
Vact.w1
Vact.w2
ΔV act.
I load w1
I load w2
Vmax 1
Vmax 2
Vmin 1
Vmin 2
V tar.w1
V tar.w2
1204
Voltage difference
Actual voltage of winding
Susceptance, internal value for
GOOSE transmission
Load current
Phase angle of the load current
relative to the voltage with a
power factor of 1.0
Actual voltage of winding 1
Actual voltage of winding 2
Voltage difference between
the target voltage and the
actual voltage
Load current of winding 1
Load current of winding 2
Maximum voltage of winding 1 kV
Maximum voltage of winding 2 kV
Minimum voltage of winding 1 kV
Minimum voltage of winding 2 kV
Target voltage of winding 1
Target voltage of winding 2
Primary
Secondary % Referenced to
%
%
Voltage difference referenced
to the rated voltage of the
function
Primary
Secondary % Referenced to
kV
V
Target voltage of the primary
system referenced to the rated
voltage of the function
1/Ω
A
-
Load current referenced to the
rated current of the function
°
°
Phase angle of the load current
100 % = 180°
Primary
Secondary % Referenced to
kV
V
Target voltage of the primary
system referenced to the rated
voltage
kV
V
Target voltage of the primary
system referenced to the rated
voltage
%
%
Voltage difference referenced
to the rated voltage of the
controlled winding
A
A
Load current referenced to the
rated current of winding 1
A
A
Load current referenced to the
rated current of winding 2
V
Maximum voltage of winding 1
referenced to the rated voltage
of winding 1
V
Maximum voltage of winding 2
referenced to the rated voltage
of winding 2
V
Minimum voltage of winding 1
referenced to the rated voltage
of winding 1
V
Minimum voltage of winding 2
referenced to the rated voltage
of winding 2
kV
V
Target voltage of winding 1
referenced to the rated voltage
of winding 1
kV
V
Target voltage of winding 2
referenced to the rated voltage
of winding 2
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-A, Edition 05.2018
Hide quick links:
Advertisement
Table of Contents
