Table Of Contents - Siemens SIPROTEC 5 Technical Data Manual

11 Technical Data
11.1 General Device Data
11.2 Protection Interface and Protection Topology
11.3 Date and Time Synchronization
11.4 Automatic Reclosing
11.5 Phasor Measurement Unit
11.6 Circuit-Breaker Wear Monitoring
11.7 External Trip Initiation
11.8 Overcurrent Protection, Phases
11.9 Overcurrent Protection, Ground
11.10 Directional Overcurrent Protection, Phases
11.11 Directional Overcurrent Protection, Ground
11.12 Inrush-Current Detection
11.13 Instantaneous High-Current Tripping
11.14 Stage with Definite-Time Characteristic Curve
11.15 Stage with Inverse-Time Characteristic Curve
11.16 Voltage-Dependent Overcurrent Protection, Phases
11.17 Overvoltage Protection with 3-Phase Voltage
11.18 Overvoltage Protection with Positive-Sequence Voltage
11.19 Overvoltage Protection with Any Voltage
11.20 Undervoltage Protection with 3-Phase Voltage
11.21 Undervoltage Protection with Any Voltage
11.22 Overfrequency Protection
11.23 Underfrequency Protection
11.24 Underfrequency Load Shedding
11.25 Rate of Frequency Change Protection
11.26 Power Protection (P,Q), 3-Phase
11.27 Instantaneous Tripping at Switch onto Fault
11.28 Circuit-Breaker Failure Protection
11.29 Negative-Sequence Protection with Definite-Time Characteristic Curve
11.30 Stage with Inverse-Time Characteristic Curve
11.31 Thermal Overload Protection, 3-Phase - Advanced
11.32 Thermal Overload Protection, 1-Phase
11.33 Temperature Supervision
11.34 Analog-Units Function Group
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-A, Edition 05.2018
1105
1114
1116
1117
1118
1119
1120
1121
1133
1143
1149
1159
1160
1161
1163
1165
1168
1170
1171
1173
1176
1177
1178
1179
1181
1183
1184
1185
1187
1188
1190
1194
1197
1198
1103