Mounting The Dnp31 Remotely From The Umc100.3 - ABB DNP31.0 Technical Description

Mounting the DNP31 remotely from the UMC100.3

When the communication interface is installed remotely from the UMC100.3 - e. g. in the cable chamber of a motor control
center - the DNP31 must be separately supplied. This makes it possible to keep the DNP31 online even in the case when the
drawer is removed. Ready made cables are available. But it is also possible to use own cables.
For more details see section „Using DNP31 in a Drawout System".
Mounting the Single Mounting Kit
The single mounting kit (SMK3.0) can be either mounted on a DIN rail hat or fixed with screws on a fitting panel.
Assembly
(2)
Mounting the DNP31 on the Single Mounting Kit
Step 1:
Plug in the communication
connectors.
Issue: 09.2015
(1)
Step 2:
Move down the DNP31
Move down
- 7 -
Disassembly
(2)
(1)
Step 3:
Move down the DNP31 until
snapped in
Step 4:
Fix cable with cable ties
Data sheet DNP31.0