Rear Camber Adjustment - Suzuki XL7 2007 Service Manual

2C-35 Rear Suspension:

Rear Camber Adjustment

1. Loosen the upper control arm-to-frame fastener
enough to allow movement.
NOTE
The frame of the vehicle is slotted, turning
the cam nut will move the camber in to the
designated location.
2. Rotate the upper control arm-to-frame fastener in the
direction necessary to the correct the camber
measurement.
3. Snug the upper control arm-to-frame fastener, do not
tighten at this time.
4. Reinspect the rear camber specifications and adjust
as necessary.
CAUTION
!
Refer to "Fastener Notice: ".
5. Hold the nut and tighten the upper control arm-to-
frame bolt.
Tightening torque
Tighten the bolt to 110 N⋅m (81 lb ft).
6. Repeat the procedure for the other rear wheel.
Rear Toe Adjustment
1. Loosen the suspension adjustment link-to-frame
fastener enough to allow for movement.
NOTE
The frame of the vehicle is slotted, a cam nut
is available for service if required.
2. Rotate the suspension adjustment link cam nut in the
direction necessary to correct the toe angle.
3. Snug the suspension adjustment link-to-frame
fastener, do not tighten at this time.
4. Reinspect the rear toe specifications and adjust as
necessary.
CAUTION
!
Refer to "Fastener Notice: ".
5. Hold the nut and tighten the link-to-frame fastener
bolt.
Tightening torque
Tighten the bolt to 110 N⋅m (81 lb ft).
6. Repeat the procedure for the other rear wheel.