PS4210 Installation Guide
2 Rack Mounting the Array
Figure 2: Installing the Array Into the Rack
Figure 3 shows the front view of the 3.5-inch drive array.
Figure 3: 3.5-Inch Drive Array - Front View (Without Bezel)
Figure 4 shows the front view of the 2.5-inch drive array.
Figure 4: 2.5-Inch Drive Array - Front View (Without Bezel)
With assistance, lift the array, keeping the array level, and slide it onto the mounting rails until
the array engages.
Attach the Array to the Mounting Rails
Make sure the array captive fasteners on the front of the array line up with the threaded holes on
the front of the mounting rails, and manually secure the captive fasteners to the rails.
Do not overtighten the thumbscrews.
Note:
7