Dell EqualLogic PS4210 Installation And Setup Manual page 40

PS4210 Installation Guide
Power Supplies
Physical
Height
Width
Depth
Weight
(fully loaded array)
Available Hard Drive Power (Per Slot)
Supported hard
drive power
consumption
(continuous)
Environmental
Operating temperature
Storage temperature
Operating relative
humidity
Storage relative humidity 5% to 95% (noncondensing)
Operating vibration
Storage vibration
Storage shock
Operating altitude
Storage altitude
Airborne contaminant
32
Under typical line conditions and over the entire system ambient
operating range, the inrush current might reach 55A per power supply for
10 ms or less.
2U: 8.68 cm (3.41 inches)
8.68 cm (3.41 inches)
44.63 cm (17.57 inches)
PS4210 E (3.5-inch drives): 57.5 cm (22.6 inches)
PS4210 X, XV (2.5-inch drives) 54.1 cm (21.3 inches)
PS4210X, XV (2.5-inch drives), S, XS: 24.1 kg (53 lb)
PS4210E (3.5-inch drives): 44.45 kg (98 lb)
For 2.5-inch drives:
• Up to 1.2 A at +5V
• Up to 0.5 A at +12V
For 3.5-inch drives:
• Up to 1.16 A at +5V
• Up to 1.6 A at +12V
5° to 50°C (41° to 104°F) with a maximum temperature gradation of 10°C
per hour
Note:
For altitudes above 2950 feet, the maximum operating temperature
is derated 1ºF/550 ft.
–40° to 65°C (–40° to 149°F) with a maximum temperature gradation of
20°C per hour
20% to 80% (noncondensing) with a maximum humidity gradation of
10% per hour
0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations only
1.88 Grms (10 to 500 Hz) for 15 minutes (all 6 sides)
PS4210X, XV (2.5-inch drives):
PS4210E (3.5-inch drives):
• Half-sine shock 7 1G +/- 5% with a pulse duration of 2 ms +/- 10% (all
6 sides)
• Square wave shock 22G with a velocity change of 200 in/sec (all 6
sides)
–16 to 3048 m (–50 to 10,000 ft)
Note: For altitudes above 2950 feet, the maximum operating temperature
is derated 17.22222°C (1ºF)/550 ft.
–16 to 10,600 m (–50 to 35,000 ft)
Class G2 or lower as defined by ISA-S71.04-1985
7 Other Information You Might Need