Dell EqualLogic PS4210 Installation And Setup Manual page 30

PS4210 Installation Guide
3. Click in the warning dialog box to open the Configure Member – General Settings dialog
Yes
box.
4. Select the pool and click
pool.
5. Select the RAID policy on the Configure Member – RAID Configuration dialog box.
6. (Optional) Select
Wait until the member storage initialization completes
7. Click .
Next
8. Click in the Configure Member – Summary dialog box.
Finish
Note: After initial RAID configuration, it takes a few minutes for G roup Manager to display the
total usable capacity. G roup Manager might show a smaller amount until the process is
complete.
22
. If prompted, confirm you want to assign the member to the
Next
4 Software Configuration
.